9
Double bottle warmer – F6211
Heat food
Sterilization
•
Rinse the parts with clear water before using.
•
Place the product horizontally and put the steaming tray upside down
into it. Then put the storage cups with baby food steadily into the tray.
Add water to the product (pic. 5). It is advised that adding 500ml
water if heating one cup and 400ml if two. (You must add water into
product before using.)
•
Plug in the product and press the Switch button ‘ ’, turn the knob to
the ‘Heat Food’ position, the screen shows the current water
temperature, you can set up the temperature as you want
(predefined adjustable temperature is 70C-90C).
•
When the indicator light ‘ ’ flashes, indicating that the product starts
heating.
•
When the light ‘ ’ stays on, indicating that the temperature of food in
the cup is very close to what you set up, and the product is in the
stage of insulation work.
Note: Please mix the baby food thoroughly and always check if
its temperature is appropriate before feeding your child (pic 6).
•
Rinse the parts with clear water before using to get the better sterilizing effect.
•
Place the product horizontally and put the steaming tray into it. Add 70ml water to the product,
put milk bottles, pacifiers, and other baby accessories upside down into the tray (pic. 7).
•
Plug in the product and press the Switch button ‘ ’, turn the knob to the ‘Sterilize’ position.
•
If the indicator light ‘ ’ flashes, indicating that the product start heating. The product power off
automatically after the sterilizing is finished (pic. 8). If you need to sterilize the bottle higher than
the product, open the reversible lid and cover the bottleneck with storage cup (pic. 9).
