PANEL DESCRIPTIONS
Transmitting unit
►
K5706-TX
Front Panel
1. COAX OUT:
Connects to a high standard coaxial cable here
2. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
3. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
4. MODE:
Please see table below for detail information
Pin #1
Pin #2
EDID feature
OFF (
)
OFF (
)
3G/HD/SD-SDI with multi-channel audio except DTS-HD Master & Dolby TrueHD
OFF (
)
ON (
)
3G/HD/SD-SDI With stereo PCM audio
ON (
)
OFF (
)
HD/SD-SDI With stereo PCM audio
ON (
)
ON (
)
EDID Learning Mode
Factory default: OFF-OFF [
-
]
Rear Panel
5. HDMI IN:
Connects to a HDMI source device with a HDMI male-to-male cable here
6. POWER/SIGNAL LED:
Red light - POWER; Green light - SIGNAL ACTIVE
7. +5V DC:
Connects to 5V DC power supply
3
Summary of Contents for K5706
Page 8: ...EYE PATTERN 6...
