Definition of IR Earphone Jack
RS-232:
Connect to host/device serial port
with a DSUB-9 male-male cable here
The
K5700
HDMI Extender over Single Cat.X with HDBaseT-Lite,
Bi-directional IR and RS-232
boosts up your video/audio transmission
distance up to 60m (198ft) in HDTV 1080p with 48-bit color depth.
K5700 also supports the most advanced 3D video format complaint
with HDMI specification and therefore guarantees the highest 3D video
compatibility on the market. With only one cost effective Cat.5/5e/6
cable, users can readily extend HDTV sources from DVD players, Blu-ray
Disc player, PS3, PC, and any other kinds of sources compliant with
TMDS to distant display monitors including HDMI or DVI enabled TV
sets or LCD PC monitors. With the advanced design for the latest HDMI
technology, deep color video, DTS-HD or Dolby TrueHD audio, and
HDCP supports and compatibility are all further insured. This flexibility
makes HDCP compliant DVD players or PS3 transmit utmost high
quality video and audio with a greater distance at the minimal cost,
when integrating several components apart. In addition, K5700 is also
equipped with bi-directional IR pass-through path and RS-232 serial
port control. These bonus features allow users to boost IR control
distance up to 60m (198 ft) and makes IR control possible through only
single Cat.5/5e/6 cable including HDMI signals. In addition, serial port
offers the convenient path for interactive application, such as touch
panels.
The CV-57VR includes two units: transmitting unit K5700-TX and
receiving unit K5700-RX. The transmitting unit is used to capture the
input HDMI / DVI signals with IR control packets and carry the signals
via one cost effective Cat.5/5e/6 cable. The receiving unit is responsible
for equalizing the transmitted HDMI signal and reconstructing IR
signals. K5700 offers the most convenient solution for digital signage
with long distance A/V transmission path, and with 10G transmission
width ready, K5700 is ready for your next HDMI generation and
applications!
Support HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT-Lite
technology)
Extend the transmission up to 60m (198ft) from the HDMI source at
Full HD 1080p 48-bit and 40m (130ft) at 4K2K@30
HDCP & EDID Bypass
CEC support
Auto equalization
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6
cable transmission
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Support full frequency IR signal from 20KHz to 60KHz
Bi-directional IR path-through
Full Duplex RS-232 control up to 115,200 bps through connector
Wall mounting housing design for easy and robust installation
1x K5700 [TX & RX]
2x 5V DC power supply
1x User Manual
1x IR blaster
1x IR receiver
INTRODUCTION
SPECIFICATIONS
FEATURES
PACKAGE CONTENTS
i
The length depends on the characteristics and quality of the
cables. Higher resolutions and longer transmission distances
require low skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ45 connectors is recommended.
IR PASS-THROUGH
IR Extenders
CONNECTION DIAGRAM
PANEL DESCRIPTIONS
Transmitting unit
► K5700-TX
[RX]
Dip Switch:
Setup the RS-232 mode for serial
communication channel
LED:
TX/RX link indicator
RJ45:
Plug in a Cat-5/5e/6 cable that needs
to be linked to the TX or RX.
LED:
Power indicator
HDMI IN[OUT]:
Connects to a HDMI
source[Display] with a HDMI male-male cable
IR Receiver:
Infrared 3.5mm socket for
plugging in the extension cable of IR receiver
IR Blaster:
Infrared 3.5mm socket for
plugging in the extension cable of IR blaster
Latch-locking power jack:
Connect to 5V DC power supply
IR Receiver
IR Blaster
IR Receiver
IR Blaster
IR Sockets
IR BLASTER:
plug in the IR blaster to emit all IR command signals
received from the IR receiver from the other end to control the devices
corresponding to the IR signals.
IR RECEIVER:
plug in the IR receiver to receive all IR command signals
from the IR remote controls of the corresponding devices.
!
Incorrect placement of IR Blaster and Receiver may result in
the failure of the IR extenders. Please check carefully before
plugging in the IR extender to the respective IR sockets.
Warranty will not cover the damage.
You can buy any IR extension cables in the market that are
compatible to the definition of the IR sockets for the matrix
if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.
1.
IR Signal
2.
Grounding
1.
IR Signal[20-60 kHz]
2.
Grounding
3.
Power
i
[Receiving unit]
Model Name
K5700
Technical
K5700
[Tx]
K5700
[Rx]
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI Deep Color, full 3D & 4K2K@30
HDCP compliance
Yes
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP
1080p@60 60m (198ft) [CAT5e]
Audio support
Surround sound [up to 7.1ch) or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB stack-up
4-layer board [impedance control — differential 100
Ω
; single 50
Ω
]
IR pass-thru
Bi-directional
RS-232 support
Yes
Input
1x HDMI
1x 3.5mm
1x RJ-45[HDBaseT]
1x 3.5mm
Output
1x RJ-45[HDBaseT]
1x 3.5mm
1x HDMI
1x 3.5mm
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
None
3.5mm connector
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical
K5700
[Tx]
K5700
[Rx]
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
73 x 89 x 26mm [2.9" x 3.5" x 1"]
Package
175 x 125 x 216mm [6.8" x 4.9" x 8.5"]
Carton
647 x 366 x 237mm [2'1" x 1'2" x 9.3"]
Weight
Model
200g [7oz]
196g [6.9oz]
Package
900g [2 lbs]
Fixedness
Wall-mounting case with screws
Power supply
5V 2A DC
Power consumption
3 Watt [max]
7 Watt [max]
Operation
temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
1x RS-232
1x RS-232
In/ Out
DIP Switch Position
Description
T
X
& R
X
PIN#1
ON [
](DTE)
TxD: The 2
nd
pin of RS-232, which is in charge of sending data
RxD: The 3
rd
pin of RS-232, which is in charge of receiving data
OFF [
](DCE)
TxD: The 3
rd
pin of RS-232, which is in charge of sending data
RxD: The 2
nd
pin of RS-232, which is in charge of receiving data
PIN#2
ON [
]
Firmware Update
OFF [
]
Normal
K5700
K5700
Definition of IR Earphone Jack
RS-232:
Connect to host/device serial port
with a DSUB-9 male-male cable here
The
K5700
HDMI Extender over Single Cat.X with HDBaseT-Lite,
Bi-directional IR and RS-232
boosts up your video/audio transmission
distance up to 60m (198ft) in HDTV 1080p with 48-bit color depth.
K5700 also supports the most advanced 3D video format complaint
with HDMI specification and therefore guarantees the highest 3D video
compatibility on the market. With only one cost effective Cat.5/5e/6
cable, users can readily extend HDTV sources from DVD players, Blu-ray
Disc player, PS3, PC, and any other kinds of sources compliant with
TMDS to distant display monitors including HDMI or DVI enabled TV
sets or LCD PC monitors. With the advanced design for the latest HDMI
technology, deep color video, DTS-HD or Dolby TrueHD audio, and
HDCP supports and compatibility are all further insured. This flexibility
makes HDCP compliant DVD players or PS3 transmit utmost high
quality video and audio with a greater distance at the minimal cost,
when integrating several components apart. In addition, K5700 is also
equipped with bi-directional IR pass-through path and RS-232 serial
port control. These bonus features allow users to boost IR control
distance up to 60m (198 ft) and makes IR control possible through only
single Cat.5/5e/6 cable including HDMI signals. In addition, serial port
offers the convenient path for interactive application, such as touch
panels.
The CV-57VR includes two units: transmitting unit K5700-TX and
receiving unit K5700-RX. The transmitting unit is used to capture the
input HDMI / DVI signals with IR control packets and carry the signals
via one cost effective Cat.5/5e/6 cable. The receiving unit is responsible
for equalizing the transmitted HDMI signal and reconstructing IR
signals. K5700 offers the most convenient solution for digital signage
with long distance A/V transmission path, and with 10G transmission
width ready, K5700 is ready for your next HDMI generation and
applications!
Support HDMI Deep Color & full 3D & 4K2K@30 (HDBaseT-Lite
technology)
Extend the transmission up to 60m (198ft) from the HDMI source at
Full HD 1080p 48-bit and 40m (130ft) at 4K2K@30
HDCP & EDID Bypass
CEC support
Auto equalization
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6
cable transmission
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Support full frequency IR signal from 20KHz to 60KHz
Bi-directional IR path-through
Full Duplex RS-232 control up to 115,200 bps through connector
Wall mounting housing design for easy and robust installation
1x K5700 [TX & RX]
2x 5V DC power supply
1x User Manual
1x IR blaster
1x IR receiver
INTRODUCTION
SPECIFICATIONS
FEATURES
PACKAGE CONTENTS
i
The length depends on the characteristics and quality of the
cables. Higher resolutions and longer transmission distances
require low skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ45 connectors is recommended.
IR PASS-THROUGH
IR Extenders
CONNECTION DIAGRAM
PANEL DESCRIPTIONS
Transmitting unit
► K5700-TX
[RX]
Dip Switch:
Setup the RS-232 mode for serial
communication channel
LED:
TX/RX link indicator
RJ45:
Plug in a Cat-5/5e/6 cable that needs
to be linked to the TX or RX.
LED:
Power indicator
HDMI IN[OUT]:
Connects to a HDMI
source[Display] with a HDMI male-male cable
IR Receiver:
Infrared 3.5mm socket for
plugging in the extension cable of IR receiver
IR Blaster:
Infrared 3.5mm socket for
plugging in the extension cable of IR blaster
Latch-locking power jack:
Connect to 5V DC power supply
IR Receiver
IR Blaster
IR Receiver
IR Blaster
IR Sockets
IR BLASTER:
plug in the IR blaster to emit all IR command signals
received from the IR receiver from the other end to control the devices
corresponding to the IR signals.
IR RECEIVER:
plug in the IR receiver to receive all IR command signals
from the IR remote controls of the corresponding devices.
!
Incorrect placement of IR Blaster and Receiver may result in
the failure of the IR extenders. Please check carefully before
plugging in the IR extender to the respective IR sockets.
Warranty will not cover the damage.
You can buy any IR extension cables in the market that are
compatible to the definition of the IR sockets for the matrix
if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.
1.
IR Signal
2.
Grounding
1.
IR Signal[20-60 kHz]
2.
Grounding
3.
Power
i
[Receiving unit]
Model Name
K5700
Technical
K5700
[Tx]
K5700
[Rx]
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI Deep Color, full 3D & 4K2K@30
HDCP compliance
Yes
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP
1080p@60 60m (198ft) [CAT5e]
Audio support
Surround sound [up to 7.1ch) or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
PCB stack-up
4-layer board [impedance control — differential 100
Ω
; single 50
Ω
]
IR pass-thru
Bi-directional
RS-232 support
Yes
Input
1x HDMI
1x 3.5mm
1x RJ-45[HDBaseT]
1x 3.5mm
Output
1x RJ-45[HDBaseT]
1x 3.5mm
1x HDMI
1x 3.5mm
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
None
3.5mm connector
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical
K5700
[Tx]
K5700
[Rx]
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
73 x 89 x 26mm [2.9" x 3.5" x 1"]
Package
175 x 125 x 216mm [6.8" x 4.9" x 8.5"]
Carton
647 x 366 x 237mm [2'1" x 1'2" x 9.3"]
Weight
Model
200g [7oz]
196g [6.9oz]
Package
900g [2 lbs]
Fixedness
Wall-mounting case with screws
Power supply
5V 2A DC
Power consumption
3 Watt [max]
7 Watt [max]
Operation
temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
1x RS-232
1x RS-232
In/ Out
DIP Switch Position
Description
T
X
& R
X
PIN#1
ON [
](DTE)
TxD: The 2
nd
pin of RS-232, which is in charge of sending data
RxD: The 3
rd
pin of RS-232, which is in charge of receiving data
OFF [
](DCE)
TxD: The 3
rd
pin of RS-232, which is in charge of sending data
RxD: The 2
nd
pin of RS-232, which is in charge of receiving data
PIN#2
ON [
]
Firmware Update
OFF [
]
Normal
K5700
K5700
