manualshive.com logo in svg

KNX Module IC-USB-S.1, User Manual, Page: 7 / 11

Share
Download
KNX Module IC-USB-S.1 User Manual Download Page 7

2  OPERATIONAL DESCRIPTION

In KNX network installations the 

IC-USB-S.1

 can be used as KNX USB interface. A er establishing the USB 

connection, 

IC-USB-S.1

  operates  with  its  default  settings.  Setting  the  correct  Individual  Address  is 

necessary to include 

IC-USB-S.1

 in the KNX bus system.

Both  LEDs  lighting  green  show  proper  working  of  KNX  bus  connection  and  USB  connection.  Lightning 
green  means  the  connection  is  established.  Blinking  green  indicates  the  telegram  traffic  extent.  In 
Microso   Windows  the 

IC-USB-S.1

  is  recognized  as  HID  (Human  Interface  Device).  So,  no  extra  drivers 

have to be installed or downloaded. 

The 

IC-USB-S.1

's ETS (dummy) database entry, e.g. for connecting a visualization device, is available for 

ETS4 and upward. The database without parameters and without communication objects can be added 
to an ETS project as usual.

It is recommended to use USB cables that do not exceed 5 m.

All screen shots are related to the IC-USB-S.1 database file R1-4 in ETS5.

page 7

module-electronic.ru

Summary of Contents for Module IC-USB-S.1












Reviews:

No comments