KNX DM KNT 002, Instruction Manual

Page: 8 / 10

DINUY S.A.
c/Auzolan 2, 20303 Irun (SPAIN
Tel.: +34 943627988 – E-mail:
o
Cyclic OFF Telegram: OFF is sent periodically. The time between two sending: ‘Time Base for cyclic
transmission’ x ‘Time Factor for cyclic t
o
No telegram: nothing is sent.
•
Value (EIS6): It sends a value between 0 and 255. Can be selected if in case of detection ('Sending at the beginning of
detection') or at the end ('Sending at the end of detection') is sent a value between 0% and
not sending any telegram.
High threshold LUX
Sets the maximum lux level. Can be selected values
Low threshold LUX
Sets the minimum lux level. Can be selected values
6 – Constant light control
6.1 – Parameters
Activate object constant light control enable
Enable or disable this feature using an external device
Possible to select the trigger telegram ('Enable function with'
•
ON Telegram
•
OFF Telegram
Enabled Object:
Behaviour on bus voltage recovery – comm. object constant light control enable
SPAIN)
mail: knx@dinuy.com – Web: www.dinuy.com
Cyclic OFF Telegram: OFF is sent periodically. The time between two sending: ‘Time Base for cyclic
transmission’ x ‘Time Factor for cyclic transmission’.
No telegram: nothing is sent.
It sends a value between 0 and 255. Can be selected if in case of detection ('Sending at the beginning of
detection') or at the end ('Sending at the end of detection') is sent a value between 0% and
Sets the maximum lux level. Can be selected values between 15lux and 1000lux.
Sets the minimum lux level. Can be selected values between 5lux and 500lux.
Activate object constant light control enable
Enable or disable this feature using an external device.
Possible to select the trigger telegram ('Enable function with'):
comm. object constant light control enable
8
Cyclic OFF Telegram: OFF is sent periodically. The time between two sending: ‘Time Base for cyclic
It sends a value between 0 and 255. Can be selected if in case of detection ('Sending at the beginning of
detection') or at the end ('Sending at the end of detection') is sent a value between 0% and 100%, in steps of 10%, or