V1.0 / 20.03.2015 5 / 5
CHROMOFLEX
®
Pro
KNX DIN-Rail ECO
7.1 Start-up
Connect LEDs and power supply as shown in the connection options. Make sure that LED-stripes and correct power
supply are connected to
CHROMOFLEX
®
Pro
KNX CV.
For programming you need the newest version of ETS software. Needed files for the
ETS software can also be found at the above link. Additionally, check the "Software
and Manuals" file for explanations of all parameters and communication objects.
8. Contents and accessories
Every
CHROMOFLEX
®
Pro
KNX unit is shipped with this manual. The instructions are an integral part of the
equipment to which they relate and must be handed to the user.
Important note: Complete manuals for any
CHROMOFLEX
®
can be downloaded at
www.barthelme.eu
. Please
look for updates before installation.
9. Contact
Josef Barthelme GmbH & Co. KG
Oedenberger Str. 149
D-90491 Nürnberg, Germany
Tel: +49 (0) 911 42 476 0
Mail
Subject to technical changes and errors
