Camera Operation
1) Installing the Batteries
•
Open the battery door.
•
Insert 2 x AAA alkaline batteries into the camera compartment.
•
Close the battery door.
•
Note
:
Make sure that the batteries are inserted in the right directions (as marked in the diagram
above).
2) Inserting a Memory Card (not included)
This camera has no built-in internal memory. Memory can be added with a MicroSD memory card (not
included).
•
Turn off the camera first.
•
Open the battery door (please make sure the battery door is unlocked before opening).
•
Insert the MicroSD card into the camera.
•
Notes:
1. There is only one right direction to insert the MicroSD memory card into the slot. Do not
force the card into the memory card-slot, which may damage both the camera and the
MicroSD memory card.
2. The MicroSD memory card must be formatted before taking photographs. See the following
section for more information.
3) Formatting the Memory or MicroSD Card
•
Press the Menu button ( ) in PHOTO or VIDEO mode.
•
Select the setup mode by pressing the Right button.
•
Select the format icon by pressing the
W
( ) button and press the Shutter button to confirm.
•
Press the Shutter button to format the SD memory card.
4) Setting the resolution
•
Press the Menu button ( ) in PHOTO mode, select the resolutions icon by the
W
( ) key and
press the Shutter to confirm.
•
Available resolutions:
o
VGA (640 x 480), 3M (2048 x 1536),5M(2592x1944); 8M(3264x2448); 14M=4320x3240;
20M=5184X3888.
o
Six different resolutions will be displayed. Select the desired resolution by using the Up or
Down button and press the Shutter button to confirm the selection.