A. Loading staples: B. Loading nails:
9.
Instructions For Use (Nailing or Stapling):
a.
Prior to operation, make sure the battery pack is fully charged.
b.
Check whether the nails or staples are placed in the magazine
correctly.
c.
Hold the handle firmly with magazine flat on the work surface at a 90
degree angle.
d.
The brad nailer has two firing modes: Single and Contact Firing
e.
For Single Firing Mode:
i.
Push the Firing Mode switch to the left.
ii.
Depress the safety contact pin agianst the work surface.
iii.
Squeeze the trigger to fire the staple or nail. Release the
trigger and safety contact pin after firing.
f.
For Contact Firing Mode:
i.
Push the Firing Mode switch to the right.
ii.
Press the safety contact against the work surface to fire a nail
or staple.
iii.
With the trigger still depressed, raise the device and press it
against the next area you want to fire a nail or staple into.
iv.
When the contact pin is pressed against the work surface the
device will fire.
v.
WARNING: Do not keep the trigger depressed when the brad
nailer is not is use.
10.
Instructions for Depth Adjustment Wheel
a.
Depth adjustment helps protect work surfaces asnd allows proper
setting of nail heads.
