6
OPERATION
GETTING STARTED: LOADING BILLS
Follow the steps outlined in the diagram below to load bills into
the counter’s hopper.
OPERATING MODES
CO UV, MG, IR DETECTION MODE
By default, this bill counter will count as well as detect for
counterfeit bills using the UV, MG, and IR functions.
To manually cycle back to this mode:
Press [FUNC] until UV, MG, and IR indicators are lit. This means
that they are active.
Place bills in the hopper and counting will automatically begin.
Please note: UV & MG will display as orange. IR will display as red.
When these are showing lit on the display screen , these functions
are active.
CO UV, MG DETECTION MODE
This mode both counts and simultaneously detects counterfeit
bills through UV and MG scanning.
To select:
Press [FUNC] button until only the UV and MG indicators are lit.
Place bills in the hopper and counting will automatically begin.
Summary of Contents for Gear KN-BC001
Page 1: ...1 BillCounter withcounterfeit billdetection KN BC001 ...
Page 15: ...15 ...
