IA8201 Raspberry Pi Quick Start Guide
knowles.com | AUD-ESP-00519, v0.1
©2021; Knowles Electronics, LLC, Itasca, IL, USA, All Rights Reserved. SiSonic,
Knowles are the trademarks of Knowles Electronics, LLC
Alternatively, find the IP address of the Raspberry Pi and use ssh pi@<IPaddress> and get
the console to run the setup and commands
https://www.raspberrypi.org/documentation/remote-access/ip-address.md
Boot-up dialogue will run and a login prompt will appear.
Login using the following credentials:
o
Username:
pi
o
Password:
raspberry
Go to the raspberry pi terminal and run the voice_wake app
At this point, uttering “Alexa” should flash the LED by the micro USB on the IA8201
-LT
board
To enable a 5 second stream use
mkdir –p /data/data
After, run
voice_wake
and the data will be saved to the directory created
Note:
To run AVS commands, please refer to our guide on solutions.knowles.com
