Tone™ Z-Managers Installation Guide
December 2016
3
Tone Height-Adjustable Tables
Z-Managers, shown
mounted in front of
Tone vertical leg
Z-Managers, shown
mounted behind
Tone vertical leg.
Z-Managers, Plan View, Showing (4) possible placement locations
11. Insert the lower portion of the strap assembly
into the top of the Vertical Extrusion (D). Be
sure that the opening side of the Vertical
Extrusion is facing away from the leg.
12. Connect the bottom of the Vertical
Extrusion (D) to the Lower Mount Bracket
(C), previously installed in Step 2. Be sure
that the buttons snap into the holes.
13. Lower the table to the desired end-user height.
TROUBLESHOOTING THE CORD CHANNEL:
14. If you find that the cord channel is
difficult to open, a flat-blade screwdriver
may be used to pry apart the snapped
connection at one end, then “unzip” the
seam all the way to the other end.
Tone Z-Managers
