Installation Instructions
5. Assemble the back panel
Take back panel and fold to expose the color
of choice. Fold the back panel tight together
and slide it into the assembled corner, about
half way. (
Fig. 4
)
6. Assemble the second corner
+ Fold the remaining corner screen and with
two hands, fit the back panel into the
remaining corner screen just as was done in
steps 4 & 5.
(Fig. 5)
+ Adjust the overlap between the two corners
and the back panel until the screen
surround assembly fits perfectly to the size
of the worksurface, being flush with the
outer edges.
+ Peel off the backer on the Velcro tabs along
the 3” base of the corner screen. (
Fig 6
.)
While maintaining alignment, press down
firmly to adhere the corner screen to
worksurface.
Hint: It is best to do this one
side (Two Velcro tabs) at a time to ensure
perfect alignment with the worksurface.
Pop Up Easy Screen, Cardboard, continued
Fig. 4
Fig. 5
Fig. 6
Fold the back panel
Slide into the
assembled corner,
about half way
Peel off Velcro backers
Fit the back panel into the
remaining corner screen
Page 2 of 2
Part No. 3AJ9004
