manualshive.com logo in svg

Knoll Pixel KTXE6036G, Installation Instructions Manual

Share
Download
Knoll Pixel KTXE6036G Installation Instructions Manual Download Page 1

PIXEL™ Installation Instructions

T-Leg Electric Height Adjustable Tables

Glides only

Unboxing

You should have received your top plus two boxes per table.

Box 1 includes:
T-Leg assemblies, feet castings, electrical controller box and 
screws, control switch with cable and screws, leg extension 
cables, main power cable, hardware in a red plastic bag, and 
installation instructions.

Box 2 includes:
T-Leg rail kit

Hardware

28 Pan head sheet metal #10 x 1.00 screws
12 Socket button head M6 x 12mm screws
2 Pan head sheet metal #10 x 2.00 screws
8 Socket head cap M6 x 55mm screws
2 Vertical wire management clips
   (clear plastic)
4 Horizontal wire management clips
   with wood screws

Tools needed

Allen wrenches
Torque wrench
Phillips screwdriver

Related tables:

KTXE6036G
KTXE7236G

Fig. 1

Please pay close attention to torque requirements.

Step 1.

Lay the inverted table top on the floor.

Step 2.

Align the two “C” section rail (A) holes with the top 
pilot holes. Attach the rails to the top using pan 
head sheet metal #10 x 1.00 screws, 6 screws 
per rail, torque: 20 in/lb

Parts list

1 Table top
2 T-Leg assemblies
2 Feet castings
1 T-Leg rail kit
1 Electrical controller box
   and screws
1 Control switch with cable
   and screws
2 Leg extension cables
1 Main power cable

A

4AU6009 - Oct 2015
Page 1 of 6

Summary of Contents for Pixel KTXE6036G







Reviews:

No comments

Brands by name

Popular brands

Load more brands