PIXEL™ Installation Instructions
C-Leg Electric Height Adjustable Tables
Step 7.
Attach the controller box (I) in
the desired position between the
rails and legs motors using two
pan head sheet metal #10 x 2.00
screws (J).
Step 8.
Attach the control switch (K) on
the desired side of the table top
using two pan head sheet metal
#10 x 1.00 screws (H).
Step 9.
Connect all cables: two motor ca-
bles between controller box and leg
motors (M), (controller box features
cable passages); one switch cable
(N) between the switch and control-
ler box; and the main power cable
(O) that connects to the controller
box and a wall outlet.
Step 10.
Turn the assembled table into the
upright position.
Note: Use horizontal wire manage-
ment clips to secure wires under
table.
Fig. 6
Fig. 7
L
K
I
M
M
N
N
O
J
4AU6004 - Oct 2015
Page 4 of 6
