PIXEL™ Installation Instructions
C-Leg Electric Height Adjustable Tables
Glides only
Unboxing
You should have received your top plus two boxes per table.
Box 1 includes:
C-Leg assemblies, feet castings, electrical controller box and
screws, control switch with cable and screws, leg extension
cables, main power cable, hardware in a red plastic bag, and
installation instructions.
Box 2 includes:
C-Leg rail kit
Hardware
24 Pan head sheet metal #10 x 1.00 screws
12 Socket button head M6 x 12mm screws
2 Pan head sheet metal #10 x 2.00 screws
8 Socket head cap M6 x 55mm screws
2 Vertical wire management clips
(clear plastic)
4 Horizontal wire management clips
with wood screws
Tools needed
Allen wrenches
Torque wrench
Phillips screwdriver
Related tables:
KCXE6030G
KCXE7230G
A
Fig. 1
Please pay close attention to torque requirements.
Step 1.
Lay the inverted table top on the floor.
Step 2.
Align the two “C” section rail (A) holes with the top
pilot holes. Attach the rails to the top using pan
head sheet metal #10 x 1.00 screws, 6 per rail,
torque: 20 in/lb.
Parts list
1 Table top
2 C-Leg assemblies
2 Feet castings
1 C-Leg rail kit
1 Electrical controller box
and screws
1 Control switch with cable
and screws
2 Leg extension cables
1 Main power cable
4AU6004 - Oct 2015
Page 1 of 6
