Islands Collection by Knoll
®
Installation Instruction
Islands Collection by Knoll
®
October 19, 2020
Part Number: 6TD00061
Sheet 3
MX Conference Tables
Reference Number: 6TD00062
6td00061_2.ai
Fig. 2
C
C
T
Complete assembled table
with casters
2. Installation of assembled MX-base
with worksurface
( Fig. 2)
2.1 Lay worksurface upside down on a soft
non scratching surface, round
worksurface shown for example.
2.2 Center and align holes of mount (P) of
assembled leg over the provided pilot
holes and attach using 12 or 16 or 20 (C)
screws.
Note
:
For mount plate version, center and align
holes of mount plate (Q) or (R) or (S) of
assembled leg over the provided pilot
holes and attach using 8 (C) screws.
Criss-cross tightening sequence should
be used.
3. Installation of cable clip (T)
(Optional)
(Fig. 2)
3.1 First, insert one side of cable clip (T),
into grove of spine (J) or (K) or (L), then
take a long object (similar to pen) and
push in the other side.
R
P
MX Mount plate
for 4 feet base
MX Mount
Cable clip
(Optional)
