Hipso
™
Assembly Instructions
© Knoll, Inc.
Page
9 of 12
14.
Attach the crossbar to the worksurface starting with the
screws directly next to the motor housing using four (4)
#10 x 2½" wood screws (
E
).
Required: #2 Phillips Head Screwdriver or the Offset
Screwdriver.
(4) #10 x 2½" wood screws
15.
For 51" or 57"-wide tops, continue securing the crossbar
to the worksurface. No additional screws are required for
a 45"-wide top.
The 51"-wide top will use an additional
two (2) #10 x 2½" wood screws (E).
A 57"-wide top will use an additional
four (4) #10 x 2½" wood screws (E).
