WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
SENSOR SETTINGS
•
Choose the colour temperature with the aid of the 3-possition switch on the back
•
Replace the body of the luminaire to the base plate and fix it with the screw and washer
•
Switch on and check for correct operation
SENSOR SETTINGS
•
This controls the range of the sensor from a minimum of 1m to a
maximum of 8m
•
The time can be set from a minimum of 6 seconds to a maximum of 10
minutes
•
This controls the light level at which the sensor will operate when motion
is detected, and it can be set from a minimum of 10 lux to a maximum of
300 lux
Manual override
can be activated by switching Off and On twice within 2 seconds. This will turn the luminaire
permanently on. To cancel and return to automatic mode, switch the power off for at least 10 seconds
WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product contains a light source of energy efficiency class E to Regulation (EU) No. 2019/2015.
This product contains non-replaceable light sources (LED light sources) and non-replaceable control gear.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents that may damage the product.
This product is non-dimmable.
Manual override can be activated by switching Off and On three times within 2 seconds. This will turn the
luminaire permanently on. To cancel and return to automatic mode, switch the power off for at least 10
seconds
•
Choose the colour temperature with the aid of the 3-possition switch on the back
•
Replace the body of the luminaire to the base plate and fix it with the screw and washer
•
Switch on and check for correct operation
SENSOR SETTINGS
•
This controls the range of the sensor from a minimum of 1m to a
maximum of 8m
•
The time can be set from a minimum of 6 seconds to a maximum of 10
minutes
•
This controls the light level at which the sensor will operate when motion
is detected, and it can be set from a minimum of 10 lux to a maximum of
300 lux
Manual override
can be activated by switching Off and On twice within 2 seconds. This will turn the luminaire
permanently on. To cancel and return to automatic mode, switch the power off for at least 10 seconds
WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product contains a light source of energy efficiency class E to Regulation (EU) No. 2019/2015.
This product contains non-replaceable light sources (LED light sources) and non-replaceable control gear.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents that may damage the product.
This product is non-dimmable.
•
Choose the colour temperature with the aid of the 3-possition switch on the back
•
Replace the body of the luminaire to the base plate and fix it with the screw and washer
•
Switch on and check for correct operation
SENSOR SETTINGS
•
This controls the range of the sensor from a minimum of 1m to a
maximum of 8m
•
The time can be set from a minimum of 6 seconds to a maximum of 10
minutes
•
This controls the light level at which the sensor will operate when motion
is detected, and it can be set from a minimum of 10 lux to a maximum of
300 lux
Manual override
can be activated by switching Off and On twice within 2 seconds. This will turn the luminaire
permanently on. To cancel and return to automatic mode, switch the power off for at least 10 seconds
WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product contains a light source of energy efficiency class E to Regulation (EU) No. 2019/2015.
This product contains non-replaceable light sources (LED light sources) and non-replaceable control gear.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not
use aggressive cleaning products or solvents that may damage the product.
This product is non-dimmable.
• This controls the range of the
sensor from a minimum of 1m
to a maximum of 8m
• The time can be set from a
minimum of 6 seconds to a
maximum of 10 minutes
• This controls the light level at
which the sensor will operate
when motion is detected, and it
can be set from a minimum of
10 lux to a maximum of 300
lux
