5
Hold Time
Daylight Sensor
Detection Area
Switch
1
100%
ON
50%
OFF
Hold Time
Switch
2
3
5 SEC
ON
ON
1 MIN
ON
OFF
3 MIN
OFF
ON
10 MIN
OFF
OFF
Daylight Sensor
Switch
4
25 LUX
ON
DISABLE
OFF
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product
This product is non-dimmable
WARRANTY
This product has a warranty of 5 years from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations, improper use, or removal of the batch code will invalidate the
warranty. If this product should fail within its warranty period it should be returned to the place of purchase for a
free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated
Detection Area
Switch
1
100%
ON
50%
OFF
Hold Time
Switch
2
3
5 SEC
ON
ON
1 MIN
ON
OFF
3 MIN
OFF
ON
10 MIN
OFF
OFF
Daylight Sensor
Switch
4
25 LUX
ON
DISABLE
OFF
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product
This product is non-dimmable
WARRANTY
This product has a warranty of 5 years from date of purchase. Failure to install this product in accordance with
the current edition of the IEE Wiring Regulations, improper use, or removal of the batch code will invalidate the
warranty. If this product should fail within its warranty period it should be returned to the place of purchase for a
free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated
WARNING
GENERAL
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product
This product is non-dimmable
