Page 3
Assembly Guide
Team Table
Step 5
Ensure the worksurface is centered over the frame. Pre-drill
holes in the worksurface. Fully tighten all 10Gx20mm self
tapping screws through each leg and rail spacer bracket into
the worksurface.
Completed
Step 6
Conceal any power box cables using the magnetic leg cable
covers.
Optional
Loosely connect the M8x20mm dome head bolt and slot nut
through the metal rail spacer bracket. Slide brackets onto rails,
space evenly and fully tighten in place.
Rails 800mm or longer
require 1 bracket, 1600mm or longer rails require 2 brackets.
Please Note:
Table top may have pre-drilled holes on the underside, these holes may not
ailgn to your specific frame. If this is the case, the frame will need to be aligned to the top
and new holes drilled separately and screws provided used.
