Knight Team Meeting Table Assembly Instructions Download Page 3

Page: 3 / 4

Page 2

Assembly Instructions

knightgroup.co.nz

Page 2

Assembly Instructions

Note:

Step 1

Step 2

Step 3

Securely connect legs to rails lengths using the M8x-
12mm dome head bolts.

*Supplied top may have pre-drilled holes, these
holes are NOT used & new holes need to be drilled
separately for the Team table frame.

Slide the 2 way connectors over each leg, and
securely lock into place using M8x20mm cap head
bolts.

Securely connect legs to rails lengths using the M8x-
12mm dome head bolts.

Team Meeting Table

Summary of Contents for Team Meeting Table

Page 1: ...knightgroup co nz Assembly Instructions Tools Required Powered Screwdriver 4mm and 6mm Allen Key Team Meeting Table ...

Page 3: ...he M8x 12mm dome head bolts Supplied top may have pre drilled holes these holes are NOT used new holes need to be drilled separately for the Team table frame Slide the 2 way connectors over each leg and securely lock into place using M8x20mm cap head bolts Securely connect legs to rails lengths using the M8x 12mm dome head bolts Team Meeting Table ...

Page 4: ... Table Step 4 Step 5 Conceal any power box cables using the magnetic leg cable covers Completed Ensure the worksurface is centered over the frame Pre drill holes in the worksurface Fully tighten all 10Gx20mm self tapping screws through each leg and rail spacer bracket into the worksurface ...