Knick Protos 3400, User Manual

Page: 98 / 212

98
Pg 99
Uniclean 900(X) Parameter Setting
Functional Capabilities
Setting Adjustable parameters Page
• Control Off, Unical 9000, Uniclean 900
• Time control Fixed interval, Week program:
Fixed interval:
Select program, interval
Week program: Configuration of program flows
• Program flow Individual adaptation of program steps for:
Rinsing, Cleaning, Parking, Service
• Installation
Meas. procedures
Continuous / Short-time
External control (DCS)
Off, On
DCS inputs (36...39)
active 10...30 V or active < 2 V
M/S input (42/43) active 10...30 V or active < 2 V
A/M input (40/41)
active 10...30 V or active < 2 V
Output DCS 34 Measuring, Alarm
DCS outputs (31…34)
N/O, N/C
• Sensor detection On, Off
• Immersion lock Off, Sensocheck Glass el
• Access manual control Access code required. All valves can be actuated separately.
• Probe Probe type (SensoGate, Ceramat, others)
Move time max. Adjustable; default setting 0015 s
Sealing water On, Off
Cavity rinsing
Off, Interval, Continuous
Check interval On, Off (On: Entry: Check after x travels)
Maintenance interval On, Off (On: Entry: Maintenance after x travels)
• Media adapter (I ... III)
(up to 3 metering
pumps) Each:
Pump (On, Off), Medium, Displaced volume, Residual volume
• Add. media (1 ... 2) Monitoring of medium (On, Off, Medium)
• Start-up Yes, No
• System forecast On, Off
Pg 100
Pg 108
Pg 113
Setting the Uniclean 900(X)
parameters
Pg 88