P45000
32
7 Appendix
7.1 Accessories
Partition, ZU1471
To increase the clearances. Is installed near the input’s high voltage contacts.
Jumper, ZU1474
For connection (parallel installation) of the input screw terminals of two devices.
Is installed on the screwed contact.
7.2 Standards and Directives
The devices have been developed in compliance with the following standards and directives:
Directives
Directive 2014/30/EU (EMC)
Directive 2014/35/EU (Low voltage)
Directive 2011/65/EU (RoHS)
Directive 2012/19/EU (WEEE)
Regulation (EC) No. 1907/2006 (REACH)
The current standards and directives may differ from those specified here. The standards applied are
documented in the Declaration of Conformity and the corresponding certificates. You can find these at
www.knick.de under the corresponding product.
Standards
Rail applications
EN 50155, EN 50153, EN 50123-7-1, EN 50123-7-3
Resistance to shock and vibration
EN 61373, IEC 61373
Fire protection
EN 45545-1, EN 45545-2, EN 45545-5
EMC
EN 50121-1, EN 50121-3-2, EN 50121-5
Isolation requirements
EN 50124-1
Climate
EN 50125-1, EN 50125-3
Industrial applications
EN 61010-1
EMC
EN IEC 61326-1
Functional safety
EN IEC 61508
Isolation requirements
EN 50178, UL 347, EN 61010-1, EN IEC 60664-1
Restriction of Hazardous Substances/RoHS
EN IEC 63000
Summary of Contents for P45000
Page 37: ...P45000 37 Notes ...
