15
Information on Installation
Installing the Multiplug,Installing the Sensor Cable
Installing the multiplug
Install multiplug
(A)
with 2 screws
(B)
as shown.
Installing the sensor cable
Attach the connecting cable
(A)
to the
sensor and connect to the fixing bracket
(B)
in a loop as shown in the illustration.
Using clamp
(C)
, attach the cable lightly
so that the cable is secured and not con-
stricted. The rotational movement of the
Ceramat® would otherwise damage the
cable.
NOTICE!
The cable loop must be long
enough so that the cable does not impede
the stroke movement of the fitting.
Connect the equipotential bonding cable
to terminal
(F)
(if required).
A
B
A
B
C
F
