82
Error Messages
Error
Info text
(is displayed in case of fault when
the Info key is pressed)
Problem
Possible causes
ERR 60
OUTPUT LOAD
Load error
ERR 61
OUTPUT 1 TOO LOW
Output current 1
< 0 (3.8) mA
ERR 62
OUTPUT 1 TOO HIGH
Output current 1
> 20.5 mA
ERR 63
OUTPUT 2 TOO LOW
Output current 2
< 0 (3.8) mA
ERR 64
OUTPUT 2 TOO HIGH
Output current 2
> 20.5 mA
Sensoface messages:
Cell factor monitoring
SENSOR CELL FACTOR
CALIBRATE OR CHANGE SENSOR
Table monitoring
(TC/Conc/Sal/USP)
OUT OF INTERNAL TABLE
Zero point monitoring
SENSOR ZERO CALIBRATE OR CHANGE SENSOR
Cell factor / zero point
monitoring
SENSOR ZERO/CELL FACTOR
CALIBRATE OR CHANGE SENSOR
Sensor TAG does not corre-
spond to device entry.
WRONG SENSOR TAG
Sensor GROUP does not
correspond to device entry.
WRONG SENSOR GROUP xxxx
