Installation and connection
Diaphragm Vacuum Pumps N 813
16
Translation of original Operating and Installation Instructions, english, KNF 121240-121506 09/19
6. Installation and connection
Always install the pumps under the operating parameters and
conditions described in Chapter 4. Technical data.
Observe all safety precautions (see Chapter 3).
6.1. Setting up or installing the pump
➔
Choose a safe location (flat surface) for the pump.
➔
Before installation, store the pump at the installation location to
bring it up to ambient temperature.
Refer to Fig. 7 (N 813.3 ANE), Fig. 8 (N 813.4 ANE),
Fig. 9 (N 813.5 ANE), Fig. 10 (N 813.3 ANDC-B and N 813.3
AN.29DC-B) or Fig. 11 (N 813.4 ANDC-B and
N 813.4 AN.29DC-B) for the pump dimensions.
Fig. 7: Attachment dimensions of N 813.3 ANE
(dimensional tolerances according to DIN ISO 2768-1, tolerance class V)
Fig. 8: Attachment dimensions of N 813.4 ANE
(dimensional tolerances according to DIN ISO 2768-1, tolerance class V)
Dimensions
Summary of Contents for N 813.3 AN.29DC-B
Page 39: ......
Page 40: ...KNF worldwide Find your local KNF partner on www knf com...
