K'Nex Mikey's Swing-Arm Bike 12009, Instructions Manual

Page: 5 / 23

1 1
7
1
1
1
13
12
1
1
1
1
3
3
27
1
2 2
2 1
2
2
1 1
19
1
3
1
How to Insert and
Remove Batteries
Use a small Philips Head screwdriver to
loosen the screw, then remove the battery
door. Insert 3 fresh button cell LR44
(A76 or SR44) into each compartment
with the correct polarity (+/-)
Sound doesn’t work? Check to see if you
have fresh button cell batteries and that
they are installed properly.
Parts Checklist
Before you start building, be sure to compare the parts in your set with
the parts listed below. If anything is missing, check out the back cover
of this instructions booklet for how to contact us. We’re here to help!
+
-
5
5
Battery Information:
CAUTION: Do not use Sound Module close to ear! Misuse may cause
damage to hearing.
CAUTION:
• As with all small batteries, the batteries used in this toy should be kept away
from small children, who still put things in their mouths. If they are
swallowed, promptly see a doctor and have the doctor phone 202-625-3333
collect. (US only)
• Make sure batteries are inserted correctly and follow the toy and battery
manufacturer’s instructions.
• Insert batteries with correct polarity (+/-) as shown.
• Do not mix different types of batteries; do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries. Do not mix new
and used batteries. Only batteries of the same or equivalent type
recommended should be used.
• Remove exhausted batteries from the toy; do not short circuit supply
terminals.
• Remove all batteries if the toy is not used for a long period of time.
• Do not dispose of batteries in a fire; they could leak or explode and cause
injury.
IMPORTANT TIPS:
• The Sound Module comes with 3 batteries already installed in your model.
• Rechargeable batteries are not recommended.
• Remove rechargeable batteries before recharging; they must be charged only
under adult supervision.
• Non-rechargeable batteries must not be recharged.
• Keep components free of dust; do not immerse in water.
Push button
to activate
sounds. To activate the 2 different sounds,
push the button once to
“
start
”
the engine, then push again
while playing to
“
rev
”
the engine.