K'Nex Dancing Robot Quick Start Manual Download Page 4

Page: 4 / 4

K’NEX Dancing Robot

opyright © K’NEX User Group 2008

Page: 4

Stage 8 (Egg-box)>>

Add the Egg-Box, and connect the wires, as shown.

<< Stage 7 to 8 (Learn & Go)

Note that if you are using a Learn & Go box rather than an Egg-Box:

In Stage 7, the battery pack should be placed the other way around.

You will need to add two white rods, as shown in the photo, to hold the Learn & Go box in place.

Stage 9

You can now “program” your Egg-Box or Learn & Go, in accordance with the instructions provided with that device.

Summary of Contents for Dancing Robot

Page 1: ...o from us you will receive a free 4 x C battery holder Note that the instructions provided in this section consist only of a series of photographs of the part completed and finished models Please emai...

Page 2: ...Copyright K NEX User Group 2008 Page 2 Stage 3 Now attach the other sub assembly from Stage 1 to one of the motors using two red rods Stage 4 and attach the second motor as shown Stage 5 Create six m...

Page 3: ...X Dancing Robot Copyright K NEX User Group 2008 Page 3 Stage 6 and attach them to stage 4 as illustrated Stage 7 Egg Box If you are using an Egg Box add the battery holder with batteries inserted as s...

Page 4: ...Note that if you are using a Learn Go box rather than an Egg Box 1 In Stage 7 the battery pack should be placed the other way around 2 You will need to add two white rods as shown in the photo to hol...