30
Turn clamping lever (7-12/1) to “Closed” position.
The knife is now locked.
Swivel the grinding plate with the clamped knife
forward onto the grinding wheel.
7.1.3 Positioning the knife on the grinding wheel
The cutting edge of the knife (7-13/1) must rest
approximately on the center of the grinding
wheel.
To do so, loosen the lower clamping lever (7-14/1)
counterclockwise and move the entire grinding
unit until the cutting edge of the knife is approxi-
mately at the center of the grinding wheel (see
Figure 7-13/1).
Retighten the lower clamping lever (7-14/1).
7. Operating the HV 207
1
1
Figure 7-13
Knife position on the grinding
wheel
Figure 7-14
Adjusting the knife to the center
of the grinding wheel
Figure 7-12
Locking the knife on the grinding
plate
1
