28
To do this, loosen the lower clamping lever (7-
19/1) by rotating counterclockwise and move the
entire grinding attachment until the cutting edge
of the circular knife is approx. 15 mm in front of
the center of the grinding wheel (see figure 7-18).
Retighten the lower clamping lever (7-19/1).
7.2.3 Setting the grinding angle
Place the knife on the grinding wheel to adjust
the grinding angle.
Loosen the upper clamping lever (7-20/1) by turn-
ing it counterclockwise.
Turn the hand wheel (7-21/1) until the pointer
(7-21/2) shows the desired angle on the angle
scale (7-21/3).
Retighten the upper clamping lever (7-20/1).
Figure 7-19
Adjusting the circular knife grind-
ing attachment
Figure 7-20
Loosening the clamping lever
Figure 7-21
Setting the grinding angle
7. Operation
1
1
1
3
2
