23
Figure 7-8
Loosening the clamping lever
Figure 7-9
Setting the grinding angle
1
3
2
1
7.1.3 Swiveling the circular knife grinding attachment
Loosen the two terminal screws (7-7/1) on the
mounting head by turning counterclockwise with
a hexagon screwdriver, width across flats 6 mm.
Swivel the mounting arm clockwise until its edge
is at the center marking (7-7/2) of the mounting
head.
7.1.4 Setting the grinding angle
Place the knife on the grinding wheel to adjust
the grinding angle.
Loosen the upper clamping lever (7-8/1) by turn-
ing it counterclockwise.
Turn the hand wheel (7-9/1) until the pointer
(7-9/2) shows the desired angle on the angle scale
(7-9/3).
Retighten the upper clamping lever (7-8/1).
Figure 7-7
Swiveling the circular knife grinding
attachment
1
1
2
7. Operation
