12
Initial Startup
DG 2.1S user manual V6880, version
3.3
Unpacking
Store all packing materials. Packing list should be kept for repeat orders.
Tools
Utility knife
Procedure
1. Check for damages caused during transportation. In case you notice any
damage, contact the technical support and the forwarder company.
2. Setup the delivery so the label is in the correct position. Using the utility
knife, cut the adhesive tape. Open the delivery.
3. Remove the foam insert. Take out the accessories kit and the manual.
4. Open the accessories kit and take out all accessories. Check the scope of
delivery. In case any parts are missing, contact the technical support.
5. Grip the device at its side panels and lift it out of the packaging.
6. Remove the foam inserts from the device.
7. Check for damages caused during transportation. In case you notice any
damage, contact the technical support.
8. Set-up the device in its location.
Initial Startup
Screw Fitting of the Solvent Tube
Make sure that the tapered side of the seal ring
1
faces the screw fitting
2
of
the solvent tube.
Solvent Tube Connection
Appropriate solvent tubes are included in the device accessories.
Make sure that the tube has a straight ending.
Only tighten screw fittings by hand.
Use the supplied blind fittings to seal off all unused inlets and outlets.
Connecting Degasser and Pump
Each degassing chamber features an inlet and an outlet.
Fig. 4 Screw fitting of the solvent tube
1
2
