You have now completed the installation are ready to load your new HyLoft Storage Unit.
. Place the sticker provided on a
support bar for easy reference information.
Follow the instructions above. Multiple HyLoft's may be joined together by using tie straps
provided.
(Maximum 250 lbs. per 48" x 48” unit, evenly distributed)
Installing Two HyLoft 48 x 48 Units
Periodically (at least annually) check all connections to ensure that they remain tightly fastened.
ATTACH DOWNRODS
and SUPPORT BARS
PLACE AND ATTACH GRIDS
Ceiling Stud
2A
2B
Connect
two-Piece
Downrods(D & E) to
center hole in
Ceiling Angle
Insert end
plugs before
attaching
Connect Support Bars(B)
to Downrods
3A
Lay both Wire Grids(A)
evenly on Support Bars and
attach as shown. Note: Long
grid wires are on the bottom.
3B
Bolt together Grids(A)
using 2 bolts(J), washers
and nuts(K).
Adjust
Downrods
to
Desired
Length
Sticker
four-wire clusters
nearest downrods
O
O
P
P
Q
Page 5 of 6