KMZ Zenit-EM Manual Download Page 7

M42×1 mounting thread and mechanical back focal distance of 45.5
mm, which are designed for ZENIT type of cameras with focal plane
shutter.

HELIOS-44M lens should be screwed in or out by the lens mounting
ring only.

If an interchangeable lens has no automatic diaphragm mechanism,
the diaphragm should be handled manually.

When  long   focus   lenses   are   used,   a   slight   cutting   of   the   left   or
right edges of the image on negative is likely to take place. When
using  lenses   MTO-500  and   MTO-1000  the  camera   exposure   meter
can not be used since the outer mount of these lenses overlaps the
photocell window.

With the help of a special stand the camera can be used for making
reproductions   of   drawings,   manuscripts,   photographs   and   so   on.
When making reproduction works, use should be made of extension
tubes  by setting them between the  camera  body and the lens. In
so  doing  either one  tube  or  a  combination  of  some   tubes  can  be
used.

When using extension tubes, the lens diaphragm should be operat-
ed  manually and  the  automatic diaphragm  lever  should be  set   at
index "M".

CARE OF THE CAMERA

The  camera  should be  handled  carefully, kept  clean and protected
from mechanical damage, moisture and sharp changes in tempera-
ture.

When  using   the   camera   in   frosty  weather  (below   -10°C),   do   not
keep the camera in the open air, keep it under your street-clothes,
taking it out only for the moment of photographing.

The photocell window requires special care. It should be kept clean
otherwise the exposure meter accuracy would be disturbed.

Keep  the   camera   in  a   closed  carrying  case.   In   so   doing  the   lens
should   be   capped   and   the   shutter  and   self-timer  should   be   re-
leased.

Do not  touch the  optical  details  with hands   since this  is  likely  to
damage their coating.

Clean the coated optical surfaces (except for the Fresnel lens which
is   placed  inside   the   camera)  only  from  outside   with  a   clean  soft
piece of fabric or cotton, slightly moistened with rectified alcohol or
ether.

The   Fresnel   lens   may be   cleaned  only  with  an air jet.   Using  wet
means of cleaning is not allowed.

ACP - Zenit-EM manual

http://cameras.alfredklomp.com/zenitem/manual/

7 de 7

31/03/2010 06:14 p.m.

Generated by Foxit PDF Creator © Foxit Software

http://www.foxitsoftware.com   For evaluation only.

Summary of Contents for Zenit-EM








Reviews: