12
INFRARED TECHNOLOGY
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Pow-
er button on the control panel (C) or by press-
ing the Power button on the remote control
(B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater . This is a
normal function .
1
C
B
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the two
heat settings .
Power for high is 1,500 W; low is 1,000 W .
Note: The HIGH LOW LED light will only illu-
minate when the unit is heating and the
heating elements are engaged .
2
C
B
HIGH
LOW
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F . Once
you have chosen the desired temperature,
the heater will remain on until the room
temperature increases to the temperature
on the digital display . The heater will cycle
on and off to maintain the desired room
temperature .
Note:
To engage the child lock press and hold the
temperature up and down arrows (C)
on the
control panel
simultaneously (at the same
time) and hold for 5 seconds. To disengage
the child lock
press and hold the
temperature up and down arrows (C) on the
control panel simultaneously (at the same
time) and hold for 5 seconds.
To engage the child lock using the remote
press and hold the
b
utton on remote
for 5 seconds. To disengage the child lock
using the remote press and hold the
button on remote for 5 seconds.
3
C
B
REMOTE
