__________________________________________________________ KMS
Sequential driver
Part nr: 01-01-11-0080
11
Version 1.00
kms.vankronenburg.nl
EN
—
NL
—
DE
Reminder
: When a KMS Sequential Driver is used it is neccesary to set
ALL CAN Bus devices to a communication speed of
1 Mhz (fixed)
!
EN
When setting up the driver settings be sure to select the correct injection
group. For single injecton-table tuned engines only injection group 1 should
be connected ans setup. When two cylinder banks are separately tuned
using both injection tables available on the MD35 ECU, the second bank can
be setup in the ‘Sequential Setup’ menu found in the ‘Injection Settings’
menu.
For example: a sequential VAG VR6 setup.
Summary of Contents for 01-01-11-0080
Page 2: ......
