P O R T A B L E A U D I O
15
2
4
6
7
9
8
5
1
3
DA 230
1
SD-card reader
2
4 RGB LED’s
3
4 rotary encoders
4
LCD display
5
navigation pad
6
mains-connector & fuse,
ground-free switch
7
signal inputs (XLR):
max. 2 x analogue or 1x digital
& 1 analogue
8
speaker output
4 x Speakon NL4
9
module slot (serial RS232)
SWITCHED MODE POWER AMPLIFIER
Rear installation set
for 19" racks.
Carry-Case for
DA 428 / DA 230
optionally available
Preset-Editor Software
The optional software enables a comfor-
table adjustment of the system presets for
DA 428 / DA 230 on a PC. All values and
adjustments are edited by the respective
input mask, saved as system preset on the
SD card and transferred as preset file to
DA 428 / DA 230
XSL-Stylesheet Software
By means of the software program,
which you can download for free you
get a quick overview about system
adjustments (gain, EQ, crossover,
limiter, delay) of one of the presets
saved on the SD card. The preset file
will be shown independently from the
platform on your web browser.
The connections:
On the input side four
(DA 230: two) analogue line-in or two (DA 230:
one) digital line-in connectors as well as four link-
out connectors are available which could be used
analogue, digital or combined. The outside power
connection was realised using a self-locking
Neutrik PowerCon connector, 4 Neutrik Speakon
sockets (two are wired ›bi-amp‹).
The field of application:
Its wide-range appli-
cation scope lasts from monitor- over the use in
passive components to the realization of multi-
channel systems within sound installations.
The DA 230 is mainly intended for the amplifi-
cation of more powerful reinforcement compo-
nents.