background image

MEP-7xxx Direct-Coupled Actuators (up to 320 in-lb.) 

Applications Guide, AN1113A Rev. D

The 

HMO-4536

 adjust-

able end stop kit allows 

rotation to be blocked at 

a desired angle in one or 

both directions.

CME-7001/7002

 rotary 

switches (SPDT or dual 

SPDT) are designed to 

start and stop auxiliary 

items (such as electric heat 

or fans) or to indicate an 

actuator’s fully open or 

closed position. Switches 

are independently adjust-

able for a trip point any-

where within the angular 

rotation of the driving 

actuator.

Accessories

The 

HCO-1152

 enclosure 

kit, consisting of a metal 

mounting plate, plastic 

cover, non-rotation brack-

et, plug caps, and screws, 

is designed to protect 

actuators from inclement 

conditions. See also the 

HMO-4521 cord grip.

For sample proportional 

heating/cooling applica-

tions using the 

CTE-5202

 

electronic thermostat, see 

the 

CTE-5202 Applica

-

tions Guide

.

An 

HMO-4521

 liquid-tight 

cord grip threads into con-

duit fittings on MEP-7xxx 

actuators when an ingress 

protection rating of IP54 is 

required. The HMO-4521 

accepts 0.18 to 0.40" diam-

eter cables. See also the 

HCO-1152 and HPO-7001.

Thermostat

Auxiliary Switches and End Stops

Transformers

Enclosure, Cord Grip, and Wiring Kits

An 

HPO-7001

 assembled wiring kit has an HMO-

4521 liquid-tight cord grip, a 3-foot plenum-rated 

cable, conduit fitting, and a pre-wired terminal block 

for the MEP-75xx/78xx actuators:

An 

XEE-6000 series

 Class-2 transformer provides 24 

VAC power to the actuator:

XEE-6111-050

 

120 to 24 VAC, 50 VA, single-hub

XEE-6112-050

 

120 to 24 VAC 50 VA, dual-hub

Summary of Contents for MEP-7 Series












Reviews: