KMC Controls KMD-5569 Installation Manual Download Page 4

Page: 4 / 5

11. Type "ATI5" to view the configuration in the first stored profile (AT&W). Verify that the

highlighted parameters match your first three entries in Step 10.

12. Hit any key to scroll down and confirm that the second profile (AT&W1) matches.

13. To exit the program, first hang-up by clicking the telephone icon in the Tool Bar at the top of the

page, then click

File

-->

Exit

from the menu bar.

You may now test the connection using WinControl XL.

NOTE:

The "AT" prefix does not appear on screen with the data values.

Summary of Contents for KMD-5569

Page 2: ...U S Robotics 56K NOTE If there is more than one USRobotics modem the KMD 5569 will be identified by the letters EXT on the end of its file name NOTE If USRobotics drivers have never been installed on your PC you will not see a selection for the KMD 5569 Instead select the Com Port e g COM1 that you used to connect the modem to the PC ...

Page 4: ...ep 10 12 Hit any key to scroll down and confirm that the second profile AT W1 matches 13 To exit the program first hang up by clicking the telephone icon in the Tool Bar at the top of the page then click File Exit from the menu bar You may now test the connection using WinControl XL NOTE The AT prefix does not appear on screen with the data values ...

Page 5: ...ode you can type ATI6 after connecting to see the statistics for the last attempted or successful connection EXAMPLE 887 019 01A KMC Controls P O Box 497 19476 Industrial Drive New Paris IN 46553 U S A TEL 574 831 5250 FAX 574 831 5252 E mail info kmccontrols com Diagnostic ...