KMC Controls BAC-4000 series, Installation, Operation, And Application Manual

Page: 31 / 128

Se c t i o n 3: U s e r f u n c t i o n s
This section covers topics for the end user in a facility.
AppStat user functions are limited to changing the following functions.
Active temperature setpoints
Fan operation
Changing between heating and cooling
Override scheduled occupancy or occupancy based on the schedule in
the AppStat.
Change the display between Fahrenheit and Celsius
Operating the
AppStat
AppStat functions are accessible through a user interface consisting of simple,
context sensitive menus. The menus are opened and options are selected by
using the buttons and a color display on the front of the AppStat.
Pressing either the up button or down button changes a selection,
setting, or value.
Pressing the Enter button saves the selected setting or value. Typically
the Enter button is the middle of the three buttons below the display.
Saving a selection also advances to the next display.
Illustration 3–1 AppStat display and buttons
COOLING SETPT
Up and down
buttons
Soft key
buttons
Soft key
bar
Optional
motion sensor
72
F
°
AUTO AUTO
Done Enter Cncl
Installation, Operation, and Application Guide for AppStat
Revision G 31