KMART 43007615 Instruction Manual Download Page 6

Only adults should assemble or disasseble the swing set.For safety reasons and ease of assembly.

It is recommended that two adults assemble the swing set.The swing set includes two 5mm Socket

head wrenches.You will also need an adjustable wrench,a cross hear screwdriver and a needle-nose

pliers.

Points to remember when locating and placing the swing set:

Place your swing set on level ground a MINIMUM of (6)feet(1.83m)from any structure or obstruction

such as a fence,garage,house,overhanging brabches,laundry lines,or electrical wires.

Do not install home playground equipment over concrete,asphalt,packed earth,grass,carpet,or any

other hard surface.A fall on yo a hard surface can result in serious injury to the equipment user.

Do not place your swing set underneath electrical lines.If you must,ensure that there is a minimum

over head clearance of (6)feet(1.83m).

The swing set should be assembled near the location it 

This swing set is designed for use by children ages 6-10 years old with a maximum weight of 

45kg for each section

The maximum fall height of this swing set is 74”(1.88m)

This product is designed for normal residential use only.This product is not designed for use in 

daycare,nurseries,or other public places.This product is to be assembled by adults only in the manner

described within this instruction manual.

This product must be anchored.Anchors are included with this swing set.

Anchoring is necessary to prevent tipping,lifting and overturning.We recommend anchoring the 

swing set in concrete,especially in soft or sandy soil.

To anchor the swing set in concrete,dig a hole at least 5”(12.7cm)deep and 10”(25.4cm) to

12”(30.5cm)in diameter.Place the swing set leg in the hole,preferably on a brick or stone to keep

if from sinking.Be sure the swing leg is set 3”(7.6cm)below the ground.Pour concrete around

the legs and fill the hole.Cover concrete adequately using the recommended surfacing instruction

in this manual.Allow the concrete to set according to the concrete manufacturer’s instruction before use.

Reviews: