KMART 42955436 Quick Start Manual Download Page 3

Use the treadmill only for its intended use as described in this manual.

Children, elderly users and pregnant women are advised

NOT

to use the treadmill.

The treadmill should be used only by one person each time.

Assemble and operate the treadmill on a solid, level surface. Locate the treadmill a few feet from

walls or furniture. Check the unit before each use and verify that all fasteners are secure. Always

maintain the treadmill in good working condition.

Always check the treadmill prior to exercise to ensure that all nuts and bolts are fully tightened for

each time.

An error may occur due to unstable power.

DO NOT

share a power socket with other high-powered

items such as computers or air conditioning units.

It is suggested to wear suitable sports trainers and sensible gym clothing when using the treadmill.

Never pull the plug out by the cable.

Do not jump on the plate, this may damage the product.

Take care when folding and unfolding the treadmill before and after use.

DO NOT

attempt to repair the treadmill by yourself except for the maintenance tasks which are

described in this manual. Please consult your local dealer or the customer service. The treadmill does

not contain any user-serviceable parts so disassembling it by yourself could result in serious injury.

Make sure you are wearing proper exercise clothing and shoes during a workout—no loose clothing.

Tie back long hair. Keep all loose towels away from the running surface. The running belt will not stop

immediately if an object becomes caught in the belt or rollers.

If you begin to feel unwell during use, stop immediately and consult your doctor or personal trainer

before continuing.

Take care when adjusting the speed setting and increase or decrease steadily.

The safety tether cord clip must be attached at waist level prior to starting a workout. The safety cord

connects the security clip to the yellow button on the console. If you encounter any type of difficulty

whilst using the treadmill, a strong tug on the safety key cord or a quick tap on the red

ON/OFF

button

will stop the running belt.

You can only mount and dismount the treadmill safely by grasping the two handlebars with hands

while the running belt is not moving.

For emergency situation, please jump and step on the frame at the two edges immediately, then stop

the machine and exit the treadmill carefully by grasping the handlebars.

Please make sure the running belt is fastened before using.

DO NOT

adjust the belt while machine is turned on or being used.

Please switch off all functions and disconnect from mains power supply after each use.

2. SAFETY NOTICE

3. CAUTION DURING USE

Summary of Contents for 42955436










Reviews: