Page of 26
6
Electromagnetic Field
-Electromagnetic fields can interfere with various electrical and electronic devices such as
pacemakers.
-Consult your doctor before using any electric arc welder or cutting device
-Keep people with pacemakers away from your welding area when welding.
-Do not wrap cable around your body while welding.
-Wrap MIG gun and ground cable together whenever possible.
-Keep MIG gun and ground cables on the same side of your body.
Shielding Gas Cylinders Can Explode
High pressure cylinders can explode if damaged, so treat them carefully.
-Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.
-Do not touch cylinder with MIG gun.
-Do not weld on the cylinder
-Always secure cylinder upright to a cart or stationary object.
-Keep cylinders away from welding or electrical circuits.
-Use the proper regulators, gas hose and fittings for the specific application.
-Do not look into the valve when opening it.
-Use protective cylinder cap whenever possible
1.5 Proper Care, Maintenance and Repair
-Always have power disconnected when working on internal components.
- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board
in static proof bag to move or ship.
-Do not put hands or fingers near moving parts such as drive rolls of fan
MIG 250S
USE AND CARE
Do not modify the MIG 250S
in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the
MIG 250S
was designed.
Always check of damaged or worn out parts before using the MIG 250S.
Broken parts will
affect the
MIG 250S
operation. Replace or repair damaged or worn parts immediately.
Store idle MIG 250S.
When
MIG 250S
is not in use, store it in a secure place out of the reach
of children. Inspect it for good working condition prior to storage and before re-use.
TECHNICAL SPECIFICATIONS
Item
Description
Power Supply
230V, 50A, 60 HZ, Single Phase
No-Load Voltage
43 Volts DC
Output Range
30 - 250 Amp DC
Duty Cycle
60% @ 177A; 30% @ 250A
Suggested Wire
MIG: Steel, Stainless Steel, Aluminum
Flux Core: Steel
Wire Diameter
.030,.035,.040
Dimensions
37.4" x 17.7" x 28.3"
Weight
187 lbs.
