Klutch 73167, Owner'S Manual

Page: 4 / 20

Page 4 of 20
Intended Use
The Klutch Electric Rod and Rebar Cutter has a powerful 110V electric motor and provides a 5-
second cycle to cut steel rods up to one inch thick.
Packaging Contents
• Rebar Cutter • Wrench Set • Oil Syringe
• Allen Key Set • Cutter Block • Monkey Wrench
• Carbon Brush • Switch • Hardware Bag
•
Air Bag
•
Tool Box
•
Owner’s Manual
Technical Specifications
Property Specification
Power 110V
Motor 1.9Kw 2.5HP
Max. Capacity 1" (25m/m)
Cutting Speed 5-second cycle
Net Weight 48 lb.
Dimensions (LXWXH) 19" X 5½" X 10"
Important Safety Information
⚠ WARNING
• Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.