48 INCH PAN AND BRAKE BOX
OWNER’S MANUAL
6 of 8
3. Wipe a light coat of machine oil on all machined surfaces to prevent rust and oil the machine
in necessary places.
4. Check for the following conditions and repair or replace when necessary:
• Loose mounting bolts.
• Worn fingers.
• Worn or cracked pivot pins or links.
• Bent or cracked levers.
• Any other condition that could hamper the safe operation of this tool.
Maintenance
Maintain your box. It is recommended that the general condition of any tool be examined before
it is used. Keep the box in good repair by adopting a program of conscientious repair and
maintenance in accordance with the recommended procedures found in this manual.
Keep handles dry, clean, and free from oil and grease.
LUBRICATION
Lubricate the box occasionally by putting SAE-30 oil on all rotating parts to ensure smooth,
trouble-free operation for a long time.
Parts List
48 INCH PAN AND BRAKE BOX
OWNER’S MANUAL
7 of 8
Parts Diagram
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
NUT
HANDLE COVER
HANDLE LEFT
HANDLE RIGHT
BUSH
SHAFT SLEEVE
SWIVEL LEFT
SWIVEL RIGHT
WASHER
SCREW
BREAK SUPPORT
PIN
WASHER
SHAFT
WOBBLE SHAFT
Part No.
16-1
16-2
16-3
17
18
19
20
21
22
23
24
25
26
27
28
Description
FORMING FINGERS2"
FORMING FINGERS3"
FORMING FINGERS4"
SCREW
NUT
KNOB BLOCK
CLAMP
STAND
BENDING LEAF
SHAFT
BUSH
ANGLE BAR
SCREW
Tension bolt
Tension bolt