Klutch 49462 Owner'S Manual Download Page 5

Page 5 of 15 

 

 

WARNING

 

PROP 65 

 

This product can expose you to chemicals including lead, which is known to the State of California 
to cause cancer. For more information, go to 

www.p65warnings.ca.gov

.

 

 

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities 
contains chemicals known to the state of California to cause cancer, birth defects, or other 
reproductive harm. Some examples of these chemicals are: 

 

 

- lead from lead-based paints, 

 

 

- crystalline silica from bricks and cement and other masonry products, and 

 

 

- arsenic and chromium from chemically-treated lumber. 

 

Your risk from these exposures varies depending on how often you do this type of work. To reduce 
your exposure to these chemicals, work in a well-ventilated area, and work with approved safety 
equipment, such as dust masks that are specially designed to filter out microscopic particles.  

 

Handling power cords on corded products may expose you to lead, a chemical known to the state 
of California to cause cancer and birth defects or other reproductive harm. Wash your hands after 
handling. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. 
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas 
may put you dangerously close to cutting tools and rotating parts. 

 

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence 
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the 
flammable liquids, gases, or dust. 

 

Do not allow the product to come into contact with an electrical source. The tool is not insulated 
and contact will cause electrical shock. 

 

Keep children and bystanders away from the work area while operating the tool. Do not allow 
children to handle the product.  

 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your 
work area. Some of these hazards may be hidden from your view and may cause personal injury 
and/or property damage if contacted. 

 

WARNING

 

PERSONAL SAFETY 

Summary of Contents for 49462
















Reviews: