Klutch 48575, Owner'S Manual

Page: 18 / 20

18
Air Regulator
Refer to the Air Regulator’s Parts Diagram and Parts List.
48577 48575 48576
1.
Before dismantling the unit, exhaust the air in the line completely.
2.
Dismantle the components and clean them in kerosene and blow with compressed air.
3.
Check for damages in the O-rings (15), (16.1), (17) and at sealing areas in the valve cone rubber,
spherical relieving seating, seating area of the housing, etc. Replace if needed or clean and
reassemble.
4.
For assembly of the unit, apply general purpose grease on the O-rings (15), (16.1), (17), on the
cylindrical surface of the valve cone (13), on threads of the adjusting screw (7), and on bearing
washer (6). Reassemble all the components.
Air Lubricator
Refer to the Air Lubricator’s Parts Diagram and Parts List.
48577 48575 48576
1. Before dismantling the unit, exhaust the air in the line completely.
2. To clean the lubricator:
a. Unscrew the threaded bowl and bowl guard
assembly (12) counter-clockwise. Dismantle
the components and clean the bowl (12.1.1)
and blow with compressed air.
b. Lift the bowl and bowl guard assembly (12)
upwards. Pull down the locking piece (12.3.1).
Turn the bowl guard 45° and pull down.
3.Check for damages in the O-rings and other parts. Replace if needed or clean and reassemble.
4.Apply general purpose grease on the O-rings and on the surface of the housing where the O- ring
enters the housing (4). Reassemble all the components.
5.
Screw the threaded bowl guard (12) onto the
housing (4).
5. Position the top flange lug portion of the bowl
guard (12) to the corresponding slots in the
housing (4). Push the bowl guard fully into the
housing. Turn the bowl guard 45° until the locking
piece (12.3.1) enters the housing slot fully.