5
3 in. Triangular
Sanding Pad (45)
Sandpaper (46)
Safety Catch (38)
Hex Wrench (43)
Trigger
Lever
(41)
Air Inlet
OPERATION:
Turn the tool off, detach the air supply, safely discharge any residual air pressure in the tool, and release
the throttle and/or turn the switch to its off position before assembling or making any adjustments to the tool
.
Work Piece and Work Area Set Up
•
Designate a work area that is clean and well-lit. The work area must not allow access by children or pets
to prevent distraction and injury.
•
Route the air hose along a safe path to reach the work area without creating a tripping hazard or exposing the
power
cord to possible damage. The power cord must reach the work area with enough extra length to allow free
movement
while working.
•
There must not be hazardous objects, such as utility lines or foreign objects, nearby that will present a hazard
while
working.
•
You must use personal safety equipment including, but not limited to, ANSI-approved eye and hearing
protection,
as well as heavy work gloves.
•
Before beginning work, protect area from sparks and debris that will fly off the work surface.
•
Remove the Plug (28) from the Air Inlet and thread the Coupler Plug (44) onto the tool using three to four wraps
of
thread sealing tape (sold separately).
Figure 1
Know Your Product
Knob for air flow control