TABLE OF CONTENTS
Description Page #
Specifications ..............................................2
Safety rules ...................................................2
Getting Started ..........................................5
Operating Your Metal Shears ................5
Maintenance.................................................5
SPECIFICATIONS
Motor . . . . . . . . . . . 120V~ 60Hz 4 Amp
Motor Speed . . . . 0 - 2500 Variable
W
Max. cutting capacity: 18 gauge
eight . . . . . . . . 5.6 lbs
SAFETY RULES
WARNING:
The double-insulated system is intended to protect the user from
shock resulting from a break in the tool's internal wiring. Observe all normal
safety precautions related to avoiding electric shock.
1. Know your machine. Read this manual carefully. Learn the machine’s
applications and limitations, as well as specific potential hazards peculiar
to it.
2. Ground all machines. This machine is “Double Insulated,” meaning that all
outside metal parts are insulated from electrical power. Double Insulated
tools are equipped with a polarized plug. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install a polarized
outlet. Do not attempt to circumvent this safety feature.
1
2
Thank you very much for choosing a Klutch product.
For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be
responsible for issues arising from modification. We strongly recommend this machine is not
modified and/or used for any application other than that for which it was designed. If you
have any questions relative to a particular application, DO NOT use the machine until you
have first contacted the distributor to determine if it can or should be performed
on the product.
For technical questions please call 1-800-222-5381.
READ ALL INSTRUCTIONS
BEFORE OPERATING
SAVE THESE INSTRUCTIONS
Before attempting to operate your new Metal Shears please read these
instructions thoroughly. You will need these instructions for the safety warnings,
precautions, assembly, operation, maintenance procedures, parts list and
diagrams.
WARNING:
The warnings, cautions and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
TM