M
cross-section
side view
2 cm
L
L M
B
K
M
L
M
L
B
A
E
E
cross-section
side view
cross-section
side view
E
F
I
I
I
I
E
F
F
I
I
I
I
R
D
7.
Secure the power supply bracket (K) by inserting one 2.4mm plastic rod
(L) into the guides on each side. Cut the rods to the required length. Next
secure the rods with M3 pressure screws (M), tightening them with the Allen
wrench to a min. depth of 2 cm.
8.
Connect power and assemble the extrusion (B) with the mounting strip (A).
9.
Insert the gaskets (E).
10.
Insert the brackets (F) into the hollows of the gaskets (E) and mount
them with bolts (I).
11.
Insert the masking cover (G) into the collar of the gaskets (E).
12.
Install springs (R) in the marked groove (minimum two per meter)
where the lower hook of the decorative cover (D) is going to mount. The
number of springs should be: 2 for 1-meter long profiles, 3 for 2-meters long
profiles and 4 for 3-meters long profiles. First and last spring should be placed
10-15 cm from the end of the profile.
KIDES-DUO mounting instructions
3
www.klusdesign.eu
